">

EDC 250 flashlight

  • Sale
  • Regular price $269.00


EDC  250
 
 
The EDC  250 lumens flashlight (EDC-T1B-250) combines maximum brightness with a disorienting tactical strobe for combat fighters.
The light turns on to maximum tactical brightness or the disorienting tactical strobe for maximum tac advantage.
There is also a medium brightness level and a low brightness level for when less light is desired, such as filling out paperwork or preserving dark adaptation.
And the light is conveniently small and light weight so you can carry it with you wherever you go
The EDC Tactical 250 lumens flashlight provides the following features:
  • Elegant mode selection between tactical pure momentary and utilitarian click on/off.
  • Lowest cost of ownership - this light is easy on the battery budget.
  • Turns on to: brightness selected by rotary control, runtime: depends on selected output.
  • Press-and-hold: 250 lumens, runtime: 1.65 hours (tactical), 2.0 hours (ANSI).
  • Double-click: 250 lumens, runtime: 1.65 hours (tactical), 2.0 hours (ANSI).
  • Triple-click: N/A, runtime: N/A.
  • True momentary switch operation for "flash and dash" tactical techniques.
  • Potted electronics for the ultimate in reliability under extreme conditions.
  • Sealed gold-plated switch for maximum reliability.
  • Anti-damage battery compartment protects battery during extreme abuse.
  • Nearly unbreakable ultra clear glass lens with anti-reflective coatings.
  • Durable Acme threads used throughout.
  • Constant brightness through constant power regulation.
  • Elegant low battery warning.
  • Designed for both regular lithium batteries and rechargeable Li-ion batteries. Protects rechargeable batteries from over-discharge.
  • Full thermal management - never gets too hot.
  • Aerospace aluminum body protected with black military Type 3 hard anodize. Stainless steel crenelated bezel with black military AlTiN finish. Raised Button Switch 
  • 123 battery.
  • Each output preset can be customized to any brightness level, Tactical Strobe, Emergency Strobe or SOS signal. Other custom options include semi-momentary operation, automatic shut-off, locator flash, burst and locking customization.
  • Water/dust proof - IP67, 20m (66 feet) of water.
  • Dimensions: Ø 25.4mm x 98mm (Ø 1" x 3.9").
  • Weight: 102g (3.6oz) including battery.

The HDS Systems' EDC Tactical interface uses a rotary control and single button to create the most advanced tactical interface in the world. Yet this advanced interface is so simple, even a young child can operate it. Best of all, this advanced interface only requires gross motor skills - the only kind you have when you are under stress, and it works in a noisy environment and with heavy gloves.

The rotary control is used to select one of the 3 modes of operation. The button activates the light.

The fully clockwise position - against the rotation stop - provides a momentary maximum output. When the button is pressed, you get maximum light output. When the button is released, you get darkness. This mode of operation is used for tactical "flash and dash" techniques - a burst of light to illuminate your opponent and the scene followed by you disappearing back into the darkness, depriving your opponent of a target. The momentary mode of operation also ensures that if you should drop your flashlight, it will remain off and not provide your opponent with a ready target.

The second clockwise position - away from the rotation stop - provides a momentary Tactical Strobe. When the button is pressed, you get a bright high speed disorienting strobe optimized to achieve compliance. When the button is released, you get darkness. This mode of operation is used for disorienting and subduing a person without the use of deadly force. The momentary mode of operation also ensures that if you should drop your flashlight, it will remain off and not provide your opponent with a ready target. 

The counterclockwise position provides an adjustable brightness control that allows you to adjust the output from bright to dim, providing you a convenient way to select the amount of light you need for your task - whether that is filling out paperwork, following a trail, investigating a crime scene or any number of other tasks requiring a constant ON light source. You click the button to turn on your flashlight. You use the rotary dial control to adjust the output brightness - including Tactical Strobe and Maximum. You click the button a second time to turn off your flashlight. Can you imagine anything more convenient?

Maximum output is always available at the press of the button, even when you are using a lower output. Just press and hold the button from any brightness level to get Maximum - release the button to return to the previous brightness level. Or double-click to toggle between the selected brightness level and Maximum.

Users Guide Link